pogeeKits
Electronic Kits and Tools
Did you know? You can check our LOW shipping costs in our SIMPLE to use shopping cart!
|
Did you know? You can check our LOW shipping costs in our SIMPLE to use shopping cart! |
|
Electronic Tutorials FREE |
Anti Static Mat - Rubber Roll - T3 ProElite
| ||||||||||||||||||||||||||||||||||||||||||||
 |
 |
 |
 |
|
ASM-G24-T3 |
ASM-B24-T3 |
ASM-G36-T3 |
ASM-B36-T3 |
Anti static mat rubber roll T3 ProElite series for ESD protection
Click these images for a larger view
Consists of a 2 layer rubber lamination - with a top (colored) side static dissipative layer and a bottom (black) side conductive layer. Create custom anti static bench mats for computer technicians or electronic assembly and repair ESD work stations. Compared to cheaper more rigid PVC anti static mats which like to stay curled, ProElite rubber mats are pliable, lay flat and conform, have a high tolerance of heat from solder irons, are less slippery, are more absorbent to - and much less prone to damage from - mechanical impact.
Use anti static mats to prevent damage to sensitive electronics devices caused by uncontrolled ESD. A properly grounded anti static mat on your electronics work bench is an essential ESD protection measure that pays for itself by preventing down time, protecting production material, and improving your product quality.
To ground this anti static mat material, users will need to install at least one (3/8") 10mm clinch snap near one corner on each mat, (or one snap at each 10 linear feet interval on longer continuous mats), and attach one end of a static mat ground cord to the installed snap and the other end of the cord to earth ground. (Available clinch snaps and ground cord not included).
For additional ESD protection, see our anti-static wrist straps for the personal grounding needs of individual operators.
|
Parameters of T3 ProElite Rubber Anti Static Mat (3mm thickness) |
||
|
Static Dissipation Layer (Top) |
Surface resistance: |
1010Ω |
|
Friction static voltage: |
< 100V |
|
|
Conductive Layer (Bottom) |
Surface resistance: |
≤ 10Ω |
|
Friction static voltage: |
< 50V |
|
|
Static decay time |
5,000V to 500V |
< 1.9s |
|
Volume resistance |
1010Ω |
|
|
|
||||||
|
|
Mail or FAX Order Anti Static Mat Rubber Roll
Go to ApogeeKits Electronic Kits Home Page .
|
SECURE ORDERING You will be taken to a SECURE
server before being asked for your payment information. Last modified: January 16, 2008 Website contents are copyright ApogeeKits Electronic Kits and Tools 2002 - 2008 |
