Low Cost Desoldering Pump VTD4
Solder Sucker for Circuit Repairs
Low cost hand operated "solder sucker" VTD4 removes molten solder from circuit board assemblies during repair work.
How to desolder: Depress the spring loaded plunger until it locks into the "down" position. Melt the solder connection with a soldering iron and place the tip of the solder sucker over the molten solder. Press the button to release the spring loaded plunger. Suction created at the tip of the desoldering tool vacuums the molten solder off the board. The removed solder is captured and cools instantly inside the cylinder of the tool.
- metal and plastic housing
- good suction
- length: 6.4 inch (16.2 cm)
- Ideal for circuit board repairs
- spare desoldering tips BITVTD4 are available
Quantity 1 to 9 $ 2.19
Quantity 10 or More $ 1.99