|
All Product Categories
No Soldering Kits
Mini-Kits Page 1 Page 2
Beginner Skill Level Kits
Intermediate Skill Level Kits
Advanced Skill Level Kits
Robot Kits
Accessories
AC-AC Power Adapters
AC-DC Power Adapters
AC-DC Switching Adapters
Anti-Static Equipment
Audio/Video Equipment
Automotive Devices
DMX Lighting Controllers
Downloads
Electronic Components
Electronic Enclosures
Electronic Tutorials FREE
Hand & Bench Tools
Lab DC Power Supplies
LED Clocks & Displays
LED Flashlight & Lighting
Magnifying Tools
Metal Detectors
Novelty Lights
PIC Programmers & Kits
Prototyping Goods
Remote Control Products
Seasonal Products & Kits
Security Systems
Soldering & Desoldering Tools
Special Order Page
Test Equipment
Timing Kits & Modules
Policies
| |
PC Function Generator PCG10AU from Velleman
Test Equipment (assembled) PC Based Instruments
PC based function generator PCG10AU
Click these images for a larger view.
PC based function generator is fully assembled and ready to use when you open the box.
0 to 1MHz Function Generator for the PC. Direct Digital Wave Synthesis!
Use this PC controlled function generator PCG10AU from Velleman to create just the waveform signal you need. NOT a kit, this function generator
is fully assembled and ready to use as soon as you open the box. Just install the included software on your computer and use it to edit the output waveform signal.
PC function Generator PCG10AU features
- frequency range : from 0.01Hz to 1MHz
- crystal-based stability
- optically isolated from the PC
- low sine wave distortion
- TTL-level synchronization output
- stores up to 32K of waveform points
- standard waveforms : sine, square and triangle
- predefined library waveforms included : noise, sweep, ...
- includes Windows™ integrated software for the function generator and Velleman PC oscilloscopes
- you can create your own waveforms with the integrated signal wave editor
- can be chained with Velleman PC oscilloscopes to the same PC printer port (LPT1, 2 or 3)
- extended bode plot possibility, used with PC oscilloscope PCS500AU
- function generator screen with signal preview
- kit-version available : function generator kit K8016
- minimum system requirements:
- IBM compatible desktop PC. (will not work on most laptops)
- Windows 95, 98, ME, Win2000, NT, XP
- SVGA display card (min 800x600 resolution)
- mouse
- free printer port (LPT1, LPT2, or LPT3)
- CD ROM drive
Click these images for a larger view.
PC Function Generator PCG10AU Specifications
- comes with adapter : yes (110V)
- direct digital wave synthesis (DDS), 32K wave table
- distance control via RS232 (remote control through RS232 serial port)
- frequency setting resolution : 0.01%
- amplitude range : 100mVpp to 10Vpp @ 600ohm load
- amplitude resolution : 0.4% of full scale
- offset : from 0 to -5V or +5V max. (resolution 0.4% of full scale)
- vertical resolution : 8 bits (0.4% of full scale)
- maximum sample rate : 32MHz
- typical sine wave distortion (THD) : < 0.08%
- output impedance : 50ohm
- dimensions : 9.3" x 6.5" x 1.9"
- includes :
- PCG10 unit
- PC parallel cable
- practical manual
- CD with PCLab2000 software
- AC power adapter
THE PCG10AU HAS BEEN DISCONTINUED AND
REPLACED BY
THE IMPROVED PC BASED FUNCTION GENERATOR PCSU1000 USB VERSION !
Go to ApogeeKits Electronic Kits Home Page .
|
pogeeKits
Electronic Kits and Tools
