PIC-18 Prototyping Breadboard BB18

PIC Programmers & Kits

PIC Prototyping / Programmer BB18
Click the image for a larger view

The fully assembled PIC-18 Prototyping Breadboard from DH Micro is ready to use.

Features

Overall board dimensions 5.50" x 4.50".
Constructed on a 2-layer PCB with solder masks and a informative silk screen legends.
18 pin ZIF socket for the PIC
350 pin solderless breadboard prototyping area.
Power and GND pins run the length of the breadboard on both the top and bottom.
All 16 microcontroller port pins brought out to an 18 pin inline socket at the top of the breadboard.
ICSP header.
4 rubber feet.

Supports PIC Microprocessors

Compatible with all MicroChip PIC 18 pin DIP packaged microprocessors.
PIC16C52, 54, 56, 58, 554, 556, 558, 61, 620, 621, 622, 71, 710, 711, 712, 715, 716, 717, 84,
PIC16E623, 624, 625,
PIC16F627, 628, 83, 84, 818 (and others).

PIC-18 Oscillator Options

Crystal or ceramic resonator with external capacitors (DC-20MHz).
Ceramic resonator with internal capacitors (DC-20MHz).
RC oscillator (both internal and external).
TTL oscillator (DIP-8 packaged).
All oscillator components are socketed for easy removal, and are configured via jumper block JU2

Power Supply

T0-220 7805 5VDC retulator IC with heat sink.
Power switch and power-on LED.
DC power receptacle.
9V DC Power Adapter (optional accessory)

PIC-18 I/O Options

4 push buttons.
4 LEDs.
Piezo buzzer.
RS232 driver chip and DB9F connector for serial communications.
LCD socket with contrast adjustment pot.
All I/O signals available on a 14 pin header.
RS232 Serial Cable (optional accessory)

Downloads

PIC-18_Breadboard_Manual (400 kB) Manual for Breadboard18 PIC Development Board.
FW05_LCD.zip (39kb) Routines for interfacing with LCD displays.
FW06_Cust_LCD.zip (37kb) Routine for defining custom 5x7 pixel LCD characters (requires LCD_16.INC found in FW05_LCD.zip above).