|
All Product Categories
No Soldering Kits
Mini-Kits Page 1 Page 2
Beginner Skill Level Kits
Intermediate Skill Level Kits
Advanced Skill Level Kits
Robot Kits
Accessories
AC-AC Power Adapters
AC-DC Power Adapters
AC-DC Switching Adapters
Anti-Static Equipment
Audio/Video Equipment
Automotive Devices
DMX Lighting Controllers
Downloads
Electronic Components
Electronic Enclosures
Electronic Tutorials FREE
Hand & Bench Tools
Lab DC Power Supplies
LED Clocks & Displays
LED Flashlight & Lighting
Magnifying Tools
Metal Detectors
Novelty Lights
PIC Programmers & Kits
Prototyping Goods
Remote Control Products
Seasonal Products & Kits
Security Systems
Soldering & Desoldering Tools
Special Order Page
Test Equipment
Timing Kits & Modules
Policies
| |
PIC Prototyping Board R18i with
In Circuit Serial Programming (ICSP)
PIC Programmers & Kits
PIC Prototyping Board R18i
Click the images for a larger view
PIC Prototyping Board R18i comes in 3 kit options (see below)
PIC Prototyping Board R18i Features
- ICSP programming header connector provision.
- Overall board dimensions 2.00" x 3.25".
- 16 x 13 pin prototyping area (208 holes total).
- Power and GND bus lines run the length of the prototyping area on both sides (not included in proto area total pin count).
- All 13 microcontroller port pins and ~MCLR pin brought out to a clearly labeled strip along the top of the prototyping area.
- PCB is a 2-layer board with solder masks on both sides and a silk screen graphic.
- 4 corner mounting holes.
PIC Prototyping Board R18i Supports These PIC Microprocessors
- Compatible with all MicroChip PIC 18 pin DIP packaged microprocessors.
- PIC16C52, 54, 56, 58, 554, 556, 558, 61, 620, 621, 622, 71, 710, 711, 712, 715, 716, 717, 84,
- PIC16E623, 624, 625,
- PIC16F627, 628, 83, 84, 818 (and others).
PIC Prototyping Board R18i Supports These Oscillator Options
- Crystal or ceramic resonator with external capacitors (DC-20MHz).
- Ceramic resonator with internal capacitors (DC-20MHz).
- RC oscillator.
PIC Prototyping Board R18i Power Supply Options
- Footprints provided for either TO-92 or TO-220 voltage regulators.
- Footprint provided for DC power receptacle.
- Power-on LED.
- 9V DC Power Adapter (optional accessory)
PIC Prototyping Board R18i I/O Options
- 2 push buttons.
- 2 LEDs.
- Piezo buzzer.
PIC Prototyping Board R18i Downloads
Rapid 18i Manual (244kB) Manual for Rapid 18i PIC prototyping PCB.
Power Supply Options (302kB) Discussion of power supply options for DH Micro prototyping boards.
ICSP Application note (4658kB) Microchip ICSP programming application note.
PIC Prototyping Board R18i Prices
PIC prototyping board R18i and kit options are economically priced at:
Bare PCB only (see image above)
Includes PCB (above) plus basic parts kit (includes: 18 pin socket, 4MHz resonator, DC power receptacle, ICSP header, a 2 pin header with shorting jumper, 47uF cap, 0.1uF
caps x 4, 470 ohm and 10K ohm resistors, Green LED, 1N4148 diode, & 78L05).
Includes both PCB, and basic parts kit, (above) plus I/O parts kit (includes: 2 push buttons, 2N2222 transistor, 2 LEDs, 1 piezo buzzer, 470 Ohm
res x 2, & 10k Ohm res x 3).
Mail or FAX Order PIC Prototyping Board R18i
Go to ApogeeKits Electronic Kits Home Page .
|
pogeeKits
Electronic Kits and Tools
