pogeeKits Electronic Kits & Tools28 Pin PIC Prototyping Board & Electronic Kits R28i
PIC Programmers & Kits
PIC Prototyping Board R28i
Click the image for a larger view
PIC Prototyping Board R28i with in circuit serial programming (ICSP) comes in 3 electronic kit options (see below)
R28i Features
- ICSP (in circuit serial programming header connector provision
- Overall PIC prototyping board dimensions 3.00" x 3.25".
- 26 x 13 pin prototyping area (338 pins total).
- PCB is a 2-layer board with solder masks on both sides and a silk screen graphic.
- Power and GND bus lines run the length of the prototyping area on both sides (not included in proto area total pin count).
- All 22 microcontroller port pins and ~MCLR pin brought out to a clearly labeled strip along the top of the prototyping area.
- 4 corner mounting holes.
Supports These PIC Microprocessors
- Compatible with all MicroChip PIC 28 pin DIP packaged microprocessors.
- PIC16C52, 54, 56, 58, 554, 556, 558, 61, 620, 621, 622, 71, 72, 710, 711, 712, 715, 716, 717, 84,
- PIC16E623, 624, 625,
- PIC16F627, 628, 83, 84, 818 (and others).
Oscillator Options
- Crystal or ceramic resonator with external capacitors (DC-20MHz).
- Ceramic resonator with internal capacitors (DC-20MHz).
- RC oscillator.
Power Supply Options
- Footprints provided for either TO-92 or TO-220 voltage regulators.
- Footprint provided for DC power receptacle.
- Power-on LED.
- 9V DC Power Adapter (optional accessory)
I/O Options
- 3 push buttons.
- 3 LEDs.
- Piezo buzzer.
Downloads
Rapid 28i Manual (296kB) Manual for Rapid 28i PIC prototyping PCB.
Power Supply Options (302kB) Discussion of power supply options for DH Micro prototyping boards.
ICSP Application note (4658kB) Microchip ICSP programming application note.
Prices
PIC prototyping board R28i electronic kit options are economically priced at:
Mail or FAX Order PIC Prototyping Board R28i
