|
All Product Categories
No Soldering Kits
Mini-Kits Page 1 Page 2
Beginner Skill Level Kits
Intermediate Skill Level Kits
Advanced Skill Level Kits
Robot Kits
Accessories
AC-AC Power Adapters
AC-DC Power Adapters
AC-DC Switching Adapters
Anti-Static Equipment
Audio/Video Equipment
Automotive Devices
DMX Lighting Controllers
Downloads
Electronic Components
Electronic Enclosures
Electronic Tutorials FREE
Hand & Bench Tools
Lab DC Power Supplies
LED Clocks & Displays
LED Flashlight & Lighting
Magnifying Tools
Metal Detectors
Novelty Lights
PIC Programmers & Kits
Prototyping Goods
Remote Control Products
Seasonal Products & Kits
Security Systems
Soldering & Desoldering Tools
Special Order Page
Test Equipment
Timing Kits & Modules
Policies
| |
PIC Prototyping PCB Rapid 28iXL with RS232
Serial Programming
PIC Programmers & Kits
PIC Prototyping / Programmer Board (& KIT) R28iXL
Click the images for a larger view
The Rapid28iXL is a rapid PIC prototype development programmer with an extra large on board prototyping area and provisions for RS232 serial
programming of 28 pin PIC's. Optional parts kits are available (details below).
PIC Prototyping Board R28iXL Features
- Overall PIC programming board dimensions 3.50" x 3.25".
- PCB is a 2-layer board with solder masks on both sides and a silk screen graphic.
- 31 x 13 pin prototyping area (403 pins total).
- Power and GND bus lines run the length of the prototyping area on both sides (not included in proto area total pin count).
- All 22 microcontroller port pins and ~MCLR pin brought out to a clearly labeled strip along the top of the prototyping area.
- ICSP programming header.
- 4 corner mounting holes.
PIC Prototyping Board R28iXL Supports These PIC Microprocessors
- Compatible with all MicroChip PIC 28 pin DIP packaged microprocessors.
- PIC16C52, 54, 56, 58, 554, 556, 558, 61, 620, 621, 622, 71, 72, 710, 711, 712, 715, 716, 717, 84,
- PIC16E623, 624, 625,
- PIC16F627, 628, 83, 84, 818 (and others).
PIC Prototyping Board R28iXL Supports These Oscillator Options
- Crystal or ceramic resonator with external capacitors (DC-20MHz).
- Ceramic resonator with internal capacitors (DC-20MHz).
- RC oscillator.
PIC Prototyping Board R28iXL Power Supply Options
- Footprints provided for either TO-92 or TO-220 voltage regulators.
- Footprint provided for DC power receptacle.
- Power-on LED.
- 9V DC Power Adapter (optional accessory)
PIC Prototyping Board R28iXL I/O Options
- 3 push buttons.
- 3 LEDs.
- Piezo buzzer.
- RS232 driver chip and DB9F connector for serial communications.
- RS232 Serial Cable (optional accessory)
PIC Prototyping Board R28iXL Downloads
Rapid 28iXL Manual (296kB) Manual for Rapid 28i PIC prototyping PCB.
Power Supply Options (302kB) Discussion of power supply options for DH Micro prototyping boards.
RS232 Application Note (85kB) Discussion of Rapid18XL (also applies to Rapid28iXL) RS232 interface setup for
RS232 experiments.
ICSP Application note (4658kB) Microchip ICSP programming application note.
PIC Prototyping Board R28iXL Prices
PIC prototyping board R28iXL and kit options are economically priced at:
Bare PCB only (see image above)
Includes PCB (above) plus basic parts kit (includes: 28 pin socket, 4MHz resonator, DC power receptacle, ICSP
header, a 2 pin header with shorting jumper, 47uF cap, 0.1uF caps x 4, 470 ohm and 10K ohm resistors, Green LED, 1N4148 diode, & 78L05).
Includes both PCB, and basic parts kit (above) plus I/O parts kit (includes: 3 push buttons, 2N2222 transistor,
3 LEDs, 1 piezo buzzer, 470 Ohm res x 3, & 10k Ohm res x 4).
Includes PCB, basic parts kit, and I/O parts kit (above) plus RS232 interface parts kit (includes: 16
pin socket, 232 driver chip, 47uF cap, 0.1uF caps x 5, 5 x 2 header, jumpers x 4, and a DB9F connector).
Mail or FAX Order PIC Prototyping Board R28iXL
Go to ApogeeKits Electronic Kits Home Page .
|
pogeeKits
Electronic Kits and Tools
