pogeeKits Electronic Kits & Tools40 Pin PIC Prototyping PCB & Electronic Kits R40i
PIC Programmers & Kits
PIC Prototyping / Programmer Board R40i
Click the image for a larger view
PIC Prototyping Board R40i with in circuit serial programming (ICSP) comes in 3 electronic kit options (see below)
R40i Features
- ICSP programming header connector provision.
- Overall board dimensions 3.00" x 4.00".
- 2-layer board with solder masks on both sides and a silk screen graphic.
- 26 x 14 pin prototyping area (364 pins total).
- Power and GND bus lines run the length of the prototyping area on both sides (not included in proto area total pin count).
- All 33 microcontroller port pins and ~MCLR pin brought out to a clearly labeled strip along the top of the prototyping area.
- 4 corner mounting holes.
Supports These PIC Microprocessors
- Compatible with all MicroChip PIC 40 pin DIP packaged microprocessors.
- PIC16C64, 65, 662, 67, 74, 765, 77, 774, 620,
- PIC16F74, 77, 871, 874, 877,
- PIC18C442, 452,
- PIC18F442, 452, 448, 458 (and others).
Oscillator Options
- Crystal or ceramic resonator with external capacitors (DC-20MHz).
- Ceramic resonator with internal capacitors (DC-20MHz).
- RC oscillator.
Power Supply Options
- Footprints provided for either TO-92 or TO-220 voltage regulators.
- Footprint provided for DC power receptacle.
- Power-on LED.
- 9V DC Power Adapter (optional accessory)
I/O Options
- 4 push buttons.
- 4 LEDs.
- Piezo buzzer.
Downloads
Rapid 40i Manual (287kB) Manual for Rapid 40i PIC prototyping PCB.
Power Supply Options (302kB) Discussion of power supply options for DH Micro prototyping boards.
ICSP Application note (4658kB) Microchip ICSP programming application note.
Prices
PIC prototyping board R40i and electronic kit options are economically priced at:
We're sorry, the R40i Bare PCB is TEMPORARILY OUT OF STOCK
Mail or FAX Order PIC Prototyping Board R40i
