pogeeKits Electronic Kits & ToolsRF Receiver Module RX433
Remote Control Products
RF Receiver Module RX433
Click these images for a larger view.
This compact radio frequency (RF) receiver module is suitable for remote control or telemetry applications. The double sided circuit board is pre-populated with Surface Mount Devices (SMD) and is tuned to 433MHz. No module assembly or adjustments are required. RF receiver module RX433 receives RF control signals from the 8 channel RF remote control transmitter K8058 and performs as an RF receiver interface when used on the 8 channel remote control relay board K8056. (Only one RX433 RF receiver is needed for full RF remote control operation of the 8 channel relay board K8056). RF receiver module RX433 is a highly sensitive passive design that is easy to implement with a low external parts count. (Download datasheet with hook-up schematic below)
RF remote receiver module RX433 can also be used with 433MHz RF Transmitter TX433N for your custom remote control or telemetry requirements. (However, the FCC has restrictions on the sale of the TX433N transmitter module in the U.S., so we don't have these transmitters available).
RF Receiver Module Features
- no RF receiver module adjustments required
- stable output
- suitable for RF remote controls, telemetry, ...
Specifications
- RF receiver frequency: 433MHz
- receiver range: 220 yards (200m) in open air
- modulation: AM
- modulate mode: ASK
- circuit shape: LC
- sensitivity: 3µVrms
- power supply: 4.5 - 5.5V DC
- data rate: 4800 bps
- receiver selectivity: -106 dB
- channel spacing: 1 MHz
- digital and linear output
- RF receiver module pin numbers
- 1: gnd
- 2: digital output
- 3: linear output
- 4: Vcc
- 5: Vcc
- 6: gnd
- 7: gnd
- 8: antenna: 11.8" - 13.77" (30cm - 35cm)
Downloads
RF receiver module datasheet (139kB) RF receiver module datasheet with hook-up schematic
Price
RF receiver module RX433 is economically priced at:
Quantity 1 to 9 $ 6.95
Quantity 10 or More $ 5.99
Mail or FAX Order RF Receiver Module RX433
