RF Remote Control Receiver AM6621-310
Remote Control Products
Remote control RF receiver AM6621 and connection examples
Click these images for a larger view.
RF Remote Control Receiver AM6621-310 can be used to control loads of up to 10 amps directly, OR use the relay built into this remote receiver to control a larger relay of your own for higher power loads. This pre-assembled universal remote control RF receiver allows you to switch any electrical load e.g. garage doors, gates, lights, automotive, and industrial applications.
Click the RF remote control connection diagrams above for basic connection examples.
RF Remote Control Receiver Features
- RF remote control receiver relay output : 10A
- optionally use the 10 amp built in relay to control other relays for higher load requirements
- 4 different switch modes
- sending 1 second
- close contact as long as you push the button
- push on / push off
- contact closes for 3 to 4 minutes
- self-learning code
- complete with cables
Specifications
- factory assembled remote control receiver
- power supply: any 12V DC source
- recommended power adapter PS1208USA
- current consumption (receiver): 10mA max.
- receiving frequency: 310MHz
- works with 2 channel RF remote control transmitter 600-2N-310
- receiver can respond to either (1) button on the 2 channel transmitter
(two receivers are required to use both buttons on the 2 channel transmitters) - can accommodate up to 6 remote control transmitters
- dimensions : 2.9" x 2.0" x 1.0"
Price
RF remote control receiver AM6621-310 is economically priced at:
Quantity 1 to 9 $ 40.95
Quantity 10 or More $ 37.29
Mail or FAX Order RF Remote Control Receiver AM6621-310


