RF Remote Control Transmitters & Receivers
Remote Control Products
RF remote control transmitters and receivers. 2 to 8 channel RF remote control handheld transmitters send radio frequency signals to the receiver. RF remote
control receivers detect these signals and operate built in relays to control your device. The receiver relays can be used to switch your device power on and off, or simply provide a
contact closure as a control signal for the device. These multi-purpose RF remote control products and kits can be used to remotely control almost anything!
Click any of the links below to learn more about these remote control products and kits.
Remote Control - 2 Channel Remote Control RF Transmitter 600-2N-310
2 channel 310 MHz RF remote control keychain transmitter works with remote control receiver AM6621-310 (below). Pre-assembled.
Remote Receiver - Remote Control Receiver AM6621-310
Remote control receiver works with up to 6 of our RF remote control transmitter 600-2N-310 (above). Pre-assembled.
RF Remote Control - 8 Channel RF Remote Control Set VM118
Pre-assembled 8 Channel RF remote control transmitter / receiver relay board SET. Use to remotely control real world applications with RF radio waves at a range of up
to 164 feet (50 meters). Components of this SET are shown below available as unassembled electronic kits.
RF Transmitter - 8 Channel RF Remote Control Kit K8058
8 channel RF remote control transmitter kit K8058 works with the 8 channel relay board K8056 and the
RX433 RF receiver module to remotely control real world applications with a range of up to 164 feet (50 meters).
RF Transmitter - 8 Channel RF Remote Control VM118R
RF remote control handheld transmitter VM118R is a factory assembled version of the
8 channel RF remote control electronic kit K8058 shown above. VM118R makes a perfect extra remote control unit for the
8 channel remote control transmitter/receiver set VM118.
RF Receiver - 1Ch. Dual Output RF Remote Control Receiver K8070
RF remote control transmitter activates two independent receiver outputs. Each RF receiver output can be configured to toggle, pulse, or pulse with timer.
This allows you to e.g. start two different timers, have a pulse AND a timed output, have two galvanically separated outputs, etc.
RF Receiver - Remote Control Receiver Module RX433
RF receiver module RX433 receives RF control signals from the 8 channel RF remote control transmitter K8058 and performs as
an RF receiver interface when used on the 8 channel remote control relay board K8056.
Relay Board - 8 Channel Relay Board Kit K8056
This eight channel relay board can be used in several ways: stand alone relay card, addressed by switches or open collector outputs, or remote controlled through RS232.
In option remote controlled using RF (radio frequency) signals from the 8-Channel RF Remote Control Transmitter K8058 + RX433 module.
Go to ApogeeKits Electronic Kits Home Page .
| 
