Desoldering Wick DESOLDER
Velleman brand desoldering wick is actually a copper wire braid used to absorb molten solder from circuit boards during touch-up or repair operations.
How to Use
Place the end of the copper wick on top of the solder connection and heat it with a hot soldering iron. The solder melts and the capillary action of the braided wire "wicks" the molten solder off of the circuit board. Works best with a drop of soldering flux.
- 59 inches (150cm) of braided wick on a spool
- wick diameter: 0.08in (2mm)
- ideal for solder touch-up or repairs
Quantity 1 to 9 $ 1.15
Quantity 10 or More $ 1.04