pogeeKits Electronic Kits & ToolsStepper Motor Controller Electronic Kit K8005
Remote Control Products
Stepper motor control Card
Click the image for a larger view.
Stepper motor controller card can be used with bi-polar and uni-polar stepper motors. (Maximum 1A). The K8005 stepper motor control card is intended to connect with the (discontinued and no longer available) K8000RS Input/Output Interface Board (if you have one, or can still find one) to control the stepper motor using a PC. The stepper motor controller makes high precision motor control possible (up to 0.9°, or even more when using a motor with reduction). While the stepper motor turns, you can simultaneously check the status of switches using the K8000RS, or drive another motor. You can always give an emergency stop signal.
Test program included. Manual test buttons to test the stepper motor control card without the K8000RS interface. The stepper motor control card K8005 can be used in every application where positioning is needed. (For example: x-y-z position tables, a plotter, a printer, a valve). One high precision stepper motor included (12V). This is an electronic kit. Assembly of all kit components and soldering is required.
Features
- high precision motor steps capable
- stepper motor controller kit works with bi-polar or uni-polar stepper motors
- one high precision stepper motor included
Specifications
- I2C controlled via (discontinued) K8000RS Input/Output Interface Board (if you have one, or can still find one) for PC control
- communication address of the card is selectable (from 0 to 15) via DIP switches on the PCB
- maximum of 4 K8005 stepper motor control cards can be connected to 1 K8000RS
- (K8000RS is not in stock and is no longer available)
- stepper motor controller has adjustable drive speed
- programmable in Turbo Pascal for DOS, Quick Basic, and Visual Basic (Win95/98/ME)
- emergency stop signal can be send to one or all cards
- power supply: 7 to 25V DC or AC/1.5A (maximum current depends on the motor type)
- dimensions: 3.9inch x 3.5inch (9.9cm x 8.9cm)
- recommended housing for stepper motor controller: project box G386
- electronic kit component assembly and soldering required
Downloads
Manual_K8005.pdf (399KB)
Software_DSK8005.zip (987KB)
Price
Stepper motor control card electronic kit K8005 is economically priced at:
Quantity 1 to 9 $ 46.95
Quantity 10 or More $ 42.95
Mail or FAX Order Stepper Motor Controller Electronic Kit K8005
