pogeeKits Electronic Kits & ToolsPC Oscilloscope PCS500AU
Test Equipment - PC Based
PC based oscilloscope PCS500AU
Click these images for a larger view.
PC based digital storage oscilloscope PCS500AU is fully assembled and ready to use when you open the box.
2 Channel 50MHz PC based Digital Storage Oscilloscope (DSO)
The PCS500AU is a digital storage oscilloscope DSO that uses a computer and its monitor to display waveforms. All standard oscilloscope functions are available through the supplied Windows program. Its operation is identical to that of normal oscilloscope apart from the fact that all operations can be performed with the mouse. Connection is through the computer's parallel port and the scope is completely optically isolated from the computer port. The oscilloscope and transient recorder have two completely separated channels with a sampling frequency up to 1GHz. Any waveform displayed on the screen can be stored for later use in documents or for the comparison of waveforms.
PCS500AU Features:
- Comes With Power Adapter :
- yes (110V)
- PC Digital Oscilloscope General Features :
- timebase : 20ns to 100ms per division
- trigger source : CH1, CH2, EXT or free run
- trigger edge : rising or falling
- trigger level : adjustable in steps of 1/2 division
- step interpolation : linear or smoothed
- markers for : voltage and frequency
- input sensitivity : 5mV to 15V / division with auto setup-function
- pre-trigger function
- true RMS read-out (only AC component)
- recording length : 4096 samples / channel
- sampling frequency :
- real-time : 1.25kHz to 50MHz
- repetitive : 1GHz
- Spectrum Analyzer :
- frequency range : 0...1.2kHz to 25MHz
- linear or logarithmic time scale
- operating principle : FFT (Fast Fourier Transform)
- FFT resolution : 2048 lines
- FFT input channel : CH1 or CH2
- zoom function
- markers for amplitude and frequency
- Transient Recorder :
- time scale : 20ms/div to 2000s/div
- max. recording time : 9.4hours/screen
- automatic data storage
- automatic recording for more than 1 year
- max. number of samples : 100/s
- min. number of samples : 1 sample / 20s
- markers for time and amplitude
- zoom function
- recording and display of screens
- data format : ASCII
Click these screen shot images for a larger view.
Specifications
- PC Digital Oscilloscope PCS500AU General Features :
- inputs : 2 channels, 1 external trigger input
- input impedance : 1Mohm // 30pF
- frequency response : 0Hz to 50MHz (± 3dB)
- max. input voltage at BNC connector: 100V (AC + DC)
- max. signal amplitude measurable is up to 600Vp (AC+DC) with included x10 probe
- input coupling : DC, AC and GND
- optically ISOLATED from computer
- supply voltage : 9-10V DC / 1000mA
- Minimum System Requirements :
- IBM compatible desktop PC. (will not work on most laptops)
- Windows 95, 98, ME, Win2000, NT, XP
- SVGA display card (min. 800x600)
- mouse
- free printer port LPT1, LPT2 or LPT3
- CD-ROM player
- PC Digital Oscilloscope Includes :
- PCS500AU unit
- 2 each (x1/x10) oscilloscope probes (PROBE60S)
- PC parallel cable
- Getting started manual
- CD with software
- AC power adapter
Downloads
Digital oscilloscope cross reference sheet (1,681 KB)
A feature by feature comparison of all of our digital oscilloscope models. ApogeeKits carries them ALL !!
PC Oscilloscope User Manual (524KB)
Covers the operation of ALL of our PC based oscilloscopes (kits or pre-assembled).
Price
PCS500AU PC based digital oscilloscope is economically priced at only:
Quantity 1 to 9 $ 269.95 $ 169.00
Quantity 10 or More $ 244.00 $ 153.00
Mail or FAX Order PC DSO Oscilloscope PCS500AU
